← Occupation guides

47-2022.00 · Task explorer

Stonemasons: reported tasks and exploration worksheet

Build stone structures, such as piers, walls, and abutments. Lay walks, curbstones, or special types of masonry for vats, tanks, and floors.

Use the skill profile to plan your next practice →

Read the task inventory

This source lists 16 tasks, including 15 marked Core and 1 marked Supplemental. Labels and dates are retained below. Employers can combine or divide these responsibilities differently; explore the task itself before assuming it belongs in every version of the role.

Task source dates: 08/2025.

16 tasks shown

Core · Task 8768 · 08/2025 · Incumbent

Set vertical and horizontal alignment of structures, using plumb bob, gauge line, and level.

Core · Task 8766 · 08/2025 · Incumbent

Lay out wall patterns or foundations, using straight edge, rule, or staked lines.

Core · Task 8771 · 08/2025 · Incumbent

Set stone or marble in place, according to layout or pattern.

Core · Task 8770 · 08/2025 · Incumbent

Remove wedges, fill joints between stones, finish joints between stones, using a trowel, and smooth the mortar to an attractive finish, using a tuck pointer.

Core · Task 8772 · 08/2025 · Incumbent

Clean excess mortar or grout from surface of marble, stone, or monument, using sponge, brush, water, or acid.

Core · Task 8767 · 08/2025 · Incumbent

Shape, trim, face and cut marble or stone preparatory to setting, using power saws, cutting equipment, and hand tools.

Core · Task 8769 · 08/2025 · Incumbent

Mix mortar or grout and pour or spread mortar or grout on marble slabs, stone, or foundation.

Core · Task 8779 · 08/2025 · Incumbent

Construct and install prefabricated masonry units.

Core · Task 8775 · 08/2025 · Incumbent

Smooth, polish, and bevel surfaces, using hand tools and power tools.

Core · Task 8773 · 08/2025 · Incumbent

Lay brick to build shells of chimneys and smokestacks or to line or reline industrial furnaces, kilns, boilers and similar installations.

Core · Task 8774 · 08/2025 · Incumbent

Replace broken or missing masonry units in walls or floors.

Core · Task 8778 · 08/2025 · Incumbent

Remove sections of monument from truck bed, and guide stone onto foundation, using skids, hoist, or truck crane.

Core · Task 8776 · 08/2025 · Incumbent

Drill holes in marble or ornamental stone and anchor brackets in holes.

Core · Task 8780 · 08/2025 · Incumbent

Dig trench for foundation of monument, using pick and shovel.

Core · Task 8777 · 08/2025 · Incumbent

Repair cracked or chipped areas of stone or marble, using blowtorch and mastic, and remove rough or defective spots from concrete, using power grinder or chisel and hammer.

Supplemental · Task 8781 · 08/2025 · Incumbent

Position mold along guidelines of wall, press mold in place, and remove mold and paper from wall.

Make the shortlist useful

  1. Choose one to three activities that tell you something different about the work. Avoid selecting several ways of describing the same interest.
  2. For each, write an example you can discuss or a question that would change your understanding of the role.
  3. Keep source task IDs with your notes so you can return to the same description. Do not include private employer or customer information.

The exported worksheet distinguishes the reported task from your own notes. It supports exploration, not a hiring decision or a validated assessment.

Keep your worksheet

Download before leaving this page. Unsaved writing remains only in the page and is cleared on refresh. Notes and learning actions are not sent to a server. This guide describes an occupation and supports study planning; it does not provide clinical, legal or equipment-operating procedures.

Source and practice material

Occupational context uses the O*NET® 31.0 Database from the U.S. Department of Labor, Employment and Training Administration, under CC BY 4.0. View the occupation.

Skill Workbench selected and adapted the occupational information and added its own fictional cases, calculations, guidance and worksheets. USDOL/ETA has not approved, endorsed or tested these additions. O*NET® is a trademark of USDOL/ETA.